Anritsu MP8931A - GPIB Interface; GPIB Interface Function

5.2 GPIB Interface
5-3
5.2 GPIB Interface
5.2.1 GPIB interface function
The MP8931A has only device functions and does not have controller
functions.
Interface functions are shown in the table below.
Table 5.2.1-1 GPIB interface function
Code Interface function IEEE488.2 standard
SH1 All source handshake func-
tions
All functions are standard
equipped
AH1 All acceptor handshake func-
tions
All functions are standard
equipped
T6 Basic talker functions
Serial pole function
No talk-only function
MLA talker release function
Device should have one of T5,
T6, TE5 or TE6 subset.
L4 Basic listener functions
No listen-only function
MLA listener release function
Device should have one of L3,
L4, LE3 or LE4 subset.
SR1 All service request functions All functions are standard
equipped
RL1 All remote/local functions RL0 (no function) or RL1 (all
functions)
PP0 No parallel pole function PP0 (no function) or PP1 (all
functions)
DC1 All device clear functions All functions are standard
equipped
DT1 All device trigger functions DT0 (no function) or DT1 (all
functions)
C0 No system controller function C0 (no function), C4 and C5,
or one of C7, C9 and C11