5.5 Device Message Details
5-33
ERRRATEL? (Error Rate Last Query)
Function
Outputs the error rate at the end of the previous measurement interval.
This query can be used regardless of whether the measured results display is Current
or Last (set by MEASSEL).
Header Program command Query Response
ERRRATEL? --- ERRRATEL? ERRRATEL n
Value of n
<Error rate>
Note that “-.--E+--” is returned during single measurement and during the first
measurement interval of repeat measurement.
Example use
ERRRATEL?
Example response message
ERRRATEL 1.85E-14
ERRRATEL -.--E+--
ERRCNTL? (Error Count Last Query)
Function
Outputs the number of errors/total count at the end of the previous measurement in-
terval.
This query can be used regardless of whether the measured results display is Current
or Last (set by MEASSEL).
Header Program command Query Response
ERRCNTL? --- ERRCNTL? ERRCNTL n1,n2
Value of n1
<Number of errors>
Note that “-.--E+--” is returned during single measurement and during the first
measurement interval of repeat measurement.
Value of n2
<Total count>
Note that “-.--E+--” is returned during single measurement and during the first
measurement interval of repeat measurement.
Example use
ERRCNTL?
Example response message
ERRCNTL 1.12E+01,3.45E+06
ERRCNTL -.--E+--, -.--E+--
To Next Page
Loading...
