3.5 Main Menu Screen
3-9
Data polarity setting (Data)
NRZ output menu (NRZ Output*)
Continued from the previous page.
Level setting (Level)
Frequency setting (FREQ)
Data polarity setting (Data)
Clock polarity setting (Clock)
NRZ input menu (NRZ Input*)
DVB-SPI menu (DVB-SPI*)
Level setting (Level)
Clock polarity setting (Clock)
Enable polarity setting (Enable)
Termination resistor setting (Termination)
Termination voltage setting for Variable (Variable Vtt)
Threshold voltage setting for Variable (Variable Vth)
Frequency setting (FREQ)
Packet type setting (PKT)
Packet type setting (PKT)
Data rate setting (Data Rate)
System menu (System*)
Version information (Version)
Initialization (Initialize)
GPIB address setting (GPIB Address)
RS-232C baud rate setting (RS-232C Baud)
RS-232C parity bit setting (RS-232C Parity)
Display Auto-Off control setting (Display Off)
Display brightness setting (Display Dimmer)
DVB-ASI menu (DVB-ASI*)
To Next Page
Loading...
