Anybus Module Objects 147 (258)
Command Details: Ident_Change_Done
Category
Extended
Details
Command Code: 1Ah
Valid for: Object Instance
Description
This command shall be sent to the module when the host application has finished its adaptations of the Real
Identification.
It is optional to implement support for this command, except for that it must be issued if the host application
previously has responded with Block to the command Expected_Ident_Ind (1Bh).
• Command Details
Field Contents Comments
CmdExt[0] AR handle (low byte) Handle for the Application Relationship (AR)
CmdExt[1] AR handle (high byte)
• Response Details
(No data)
Anybus
®
CompactCom
™
40 PROFINET IRT Network Guide SCM-1202-023 EN 1.8
To Next Page
Loading...