Name: Anybus CompactCom 40
Brand: Anybus
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Host Application Objects 181 (258)

Command Details: Start_Pause

Details

Command Code 10h

Valid for: Object

Description

This command is sent to the host application when the system wants to initialize a pause of the system. The

length of the pause is specified in milliseconds. The response of the message contains the destination mode

(i.e. the instance number of the selected energy saving mode).

• Command Details

Field Contents Comments

Data[0] Pause time (low word, low byte) Pause time (ms)

Data[1] Pause time (low word, high byte)

Data[2] Pause time (high word, low byte)

Data[3] Pause time (high word, high byte)

• Response Details

Field Contents Comments

Data[0] Instance number (low byte) Instance number of selected Energy mode

Data[1] Instance number (low byte)

If the application is unable to select a state, given the requested pause time, it shall return one of the er-

ror codes in the table below.

# Error code Description

0x0D Invalid state Given the state of the device and the requested pause time it is currently not

possible to enter any energy saving mode

0x12 Value too low The requested pause time is too short

Anybus

CompactCom

™

40 PROFINET IRT Network Guide SCM-1202-023 EN 1.8

Questions and Answers:

Need help?

Do you have a question about the Anybus CompactCom 40 and is the answer not in the manual?

Anybus CompactCom 40 Specifications

General