Aruba 2930M - Introducing the 2930 M Switches; Switch Overview and Features

Aruba 2930M multiport switches are store-and-forward devices offering low latency for high-speed networking.
The 2930M switches also support a field-replaceable redundant power supply, Power over Ethernet (PoE)
technologies, full network management capabilities, a stacking module slot, and a flexible uplink port slot.
When 2930M stacking modules are installed in the switches, any combination of up to ten 2930M switches can be
stacked together through high-speed backplane cables to form a single extended virtual switch. See Stacking
information and topologies and the HPE ArubaOS-Switch Advanced Traffic Management Guide for your switch
OS version for more stacking information.
These switches are described in this manual:
Non-PoE switches PoE switches
Aruba 2930M 24G 1-slot Switch (JL319A) Aruba 2930M 24G PoE+ 1-slot Switch (JL320A)
Aruba 2930M 48G 1-slot Switch (JL321A) Aruba 2930M 48G PoE+ 1-slot Switch (JL322A)
Aruba 2930M 40G 8SR PoE+ 1-slot Switch (JL323A)
Aruba 2930M 24SR PoE+ 1-slot Switch (JL324A)
Aruba 2930M 40G 8 HPE Smart Rate PoE Class 6 1-slot
Switch (R0M67A)
Aruba 2930M 24 HPE Smart Rate PoE Class 6 1-slot
Switch (R0M68A)
Accessories list:
Stacking module/cables Power supply Uplink port module
Aruba 2930 2-port Stacking
Module (JL325A)
Aruba X371 12VDC 250W
100-240VAC Power Supply (JL085A)
Aruba 3810M/2930M 1-port QSFP
+ 40GbE Module (JL078A)
Aruba 2920/2930M 0.5m
Stacking Cable (J9734A)
Aruba X372 54VDC 680W
100-240VAC Power Supply (JL086A)
Aruba 3810M/2930M 4 HPE Smart Rate
1G/2.5G/5G/10G PoE+ Module (JL081A)
Aruba 2920/2930M 1m
Stacking Cable (J9735A)
Aruba X372 54VDC 1050W
110-240VAC Power Supply (JL087A)
Aruba 3810M/2930M 4-port
100M/1G/10G SFP+ MACsec Module
(JL083A)
Aruba 2920/2930M 3m
Stacking Cable (J9736A)
This chapter describes these switches with the following information:
• Front of the switches:
◦ Network ports
◦ Management ports
◦ LEDs
◦ Buttons
Chapter 2
Introducing the 2930M switches
8 Aruba 2930M Switches