ASCOM I62 - Security Settings; Open; WEP 64;128-Bit Key; Wpa-Psk & Wpa2-Psk

TD 92675GB
10 January 2011/ Ver. A
Configuration Manual
Ascom i62 VoWiFi Handset
33
2 In the IP DSCP for voice and/or IP DSCP for signalling drop-down list, select one of the
following:
• 0x38 (56) - Class selector 7
• 0x30 (48) - Class selector 6
• 0x2E (46) - Expedited Forwarding (default for voice)
• 0x28 (40) - Class selector 5
• 0x20 (32) - Class selector 4
• 0x1A (26) - Assured forwarding 31 (default for signaling)
• 0x18 (24) - Class selector 3
• 0x10 (16) - Class selector 2
• 0x08 (8) - Class selector 1
• 0x00 (0) - Default
6.4 Security Settings
The WLAN system can be configured to use various encryption and/or authentication
schemes. The use of extensive encryption/authentication schemes can cause incidents of
dropped speech during handover due to the time to process the authentication.
6.4.1 Open
Select Open if no encryption/authentication is required. To select Open as the security mode,
do the following:
1 Select Network > Network A (B, C, or D).
2 In the Security mode drop-down list, select “Open”.
6.4.2 WEP 64/128-bit Key
To select WEP64/128-bit Key as the security mode. Do the following:
1 Select Network > Network A (B, C, or D).
2In the Security mode drop-down list, select “WEP64/128-bit Key”. Additional
parameters can now be set. See below.
3In the WEP key 1 field, enter the WEP key to be used.
4In the WEP transmit key drop-down list, select "WEP key 1".
6.4.3 WPA-PSK & WPA2-PSK
To select WPA-PSK & WPA2-PSK as the security mode. Do the following:
1 Select Network > Network A (B, C, or D).
2 In the Security mode drop-down list, select “WPA-PSK & WPA2-PSK”.
3 In the WPA-PSK passphrase field, enter the passphrase for WPA-PSK/& WPA2-PSK.
6.4.4 802.1X with LEAP
To select LEAP as the authentication method. Do the following:
1 Select Network > Network A (B, C, or D).
2 In the Security mode drop-down list, select “LEAP”.
3 In the EAP authentication user name field, enter the user name for EAP
authentication.
4 In the EAP authentication password field, enter the password for EAP authentication.