ASCOM I62 - Automatic Keylock; Phone Lock; Audio Adjustment

TD 92675GB
10 January 2011/ Ver. A
Configuration Manual
Ascom i62 VoWiFi Handset
36
6.5.1 Automatic keylock
Note: If configured, it is possible to dial a pre-defined emergency number when the keypad
is locked, see 6.9.5 Emergency Number on page 50.
1 Select Device > Settings.
2In the Automatic key lock drop-down list, select one of the following:
• Enable - activates automatic keylock.
• Disable - deactivates automatic keylock
6.5.2 Phone lock
Activate the phone lock to prevent unauthorized usage of the handset. A password is
required to unlock the handset in order to access its functions.
Note: If configured, it is possible to dial a pre-defined emergency number when the handset
is locked, see 6.9.5 Emergency Number on page 50. It is not recommended to use Phone
Lock when using the Shared Phone feature.
1 Select Device > Settings.
2In the Phone lock drop-down list, select one of the following:
• On - the handset will be locked after a few seconds when it is not used.
• On in charger - the handset will be locked when placed in charger.
• Off - the phone lock is disabled.
6.5.3 Audio adjustment
Select the volumes for the different audio signals in the handset.
1 Select Audio > Volume.
2 Select the applicable volumes item in the drop-down lists:
• Handsfree volume
• Headset volume
• Speaker volume
3 In the Persistent volume drop-down list, select “Enable” to automatically store
volume changes in the handset for future calls.
1.Refer to the User Manual for more information on how the user can change the settings via the hand-
set´s keypad.
2.Some parameters cannot be changed via the keypad.
Keypad
1
1.Refer to the User Manual for more information on how the user can change the settings via the
handset´s keypad.
WinPDM
6.11.3 Brightness on page 53 x x
6.11.4 Screen Saver on page 53 x x
Messaging
6.7 Messaging Settings on page 43 x
2
2.Some parameters cannot be changed via the keypad.
x
Alarm
6.8 Alarm Settings on page 47 x