TD 92675GB
10 January 2011/ Ver. A
Configuration Manual
Ascom i62 VoWiFi Handset
52
3In the NTP server field, enter the address to the time server. If not set, the IP PBX
address is used.
4 Select Device > Settings.
5In the Time format drop-down list, select the applicable time format:
12h (for example 11:59 am/pm)
24h (for example 23:59)
6In the Date format drop-down list, select the applicable date format:
DD/MM/YYYY, for example, 31/01/2010 (also called Europe)
MM/DD/YYYY, for example, 01/31/2010 (also called US)
YYYY-MM-DD, for example, 2010-01-31 (ISO 8601)
MMM DD YYYY, for example, Jan 31 2010
DD MMM YY, for example, 31 Jan 10
DD.MM.YYYY, for example, 31.01.2010
DD-MM-YYYY, for example, 31-01-2010
6.10.2 Select Default Language
Defines he default operating language for the handset. This setting can later be changed by
the user.
1 Select Device > Settings.
2In the Language drop-down list, select the language to be used.
3 If the downloaded language is selected, it might be needed to select matching
characters as text input language, and the sort order in the phonebook
In the Input Language drop-down list, select the text input language to be used.
Note: This parameter is only applicable for the downloaded language and cannot be
changed by the user. See 6.5.9 Uploadable Language on page 39 for more
information.
6.10.3 Dialling Tone Pattern
Defines which tone pattern to use when dialling.
1 Select Audio > General.
2 In the Dialling tone pattern drop-down list, select the applicable region.
6.11 Display
6.11.1 User Display Text
Defines a text to be shown in the display in idle mode instead of the endpoint ID. If nothing
is entered in this text field, the endpoint ID will be shown.
1 Select Device > Settings.
2In the User display text field, enter the text to be displayed.
6.11.2 Backlight Timeout
Numbers of seconds before the backlight is turned off.
1 Select Device > General.
To Next Page
Loading...
