ASCOM I62 - Voice Mail Number; Message Centre Number; Max Number of Call Completions; Dial Pause Time

TD 92675GB
10 January 2011/ Ver. A
Configuration Manual
Ascom i62 VoWiFi Handset
51
6.9.6 Voice Mail Number
In some systems it is needed to assign the handset number of the Voice Mail service.
1 Select Device > Message centre.
2In the Voice mail number field, enter the number to the handset’s voice mail inbox.
6.9.7 Message Centre Number
Specifies the number to the server for Message Waiting Indication (MWI) if included in the
system.
1 Select Device > Message centre.
2In the Message Centre number field, enter the number to the server.
3In the Voice mail call clears MWI drop-down list, select “Enable” to clear MWI in the
message centre when calling the defined voice mail number.
6.9.8 Max number of Call Completions
Specifies the maximum number of call back requests the handset can handle.
1 Select Device > Call.
2In the Max number of call completions drop-down list, enter number of calls
6.9.9 Dial Pause Time
By adding a “P” to a phone number, a pause is added and will be activated when dialling. For
how long is defined here.
1 Select Device > Call.
2In the Dial pause time field, enter a pause time between 1 - 3 seconds.
6.9.10 Direct off Hook from Charger
The handset will automatically answer a call (that is quick answer) when removed from the
charger.
1 Select Device > General.
2In the Direct off hook from charger drop-down list, select “Enable”.
6.9.11 Replace Call Rejected with User Busy
Is used if the system does not support call rejected.
1 Select Device > General.
2In the Replace Call Rejected with User Busy drop-down list, select “Enable”.
6.10 Regional Settings
This section include settings suitable for a specific region or country.
6.10.1 Set Time & Date
1 Select Device > General.
2In the Time zone drop-down list, select the applicable time zone.