ASCOM I62 - Configure Profiles; Battery Warning

TD 92675GB
10 January 2011/ Ver. A
Configuration Manual
Ascom i62 VoWiFi Handset
38
2In the Clear lists in charger drop-down list, select one of the following:
• On - message lists and call lists will be deleted when handset placed in charger
• Off - no action will be performed when handset placed in charger.
6.5.5 Configure Profiles
It is possible to set up an own profile for incoming calls, message alerts, vibrating alerts, key
sound etc. This can be useful when there are many users on the same handset, and they
want different sound profiles. It can also be used for temporarily settings, for example while
in a meeting, incoming calls should be silent.
Profiles are configured via parameters in the "Profiles" folder.
1 Select "Profiles".
2 Select "Normal" or "Profile X" (where X represents 1- 4)
3 The following settings for the profile can configured:
•Profile name
• Internal/External/Callback ring signal
•Ring volume
•Vibrator
• Key sound
• Message alert signal
1
•Answering settings
• Diversion settings
Diversions
Calls can be diverted to other phone numbers, for example when busy.
1 In the applicable profile, select Diversions.
2 Activate a diversion by selecting “Enable” in the applicable diversion drop-down lists.
The following diversions are possible:
• Activate diversions for all calls
• Activate diversions on user busy
• Activate no answer diversions
3 Enter the diversion number in the applicable diversion number text field.
4 (Optional) If the handset is configured to access the PBX via SIP protocol, the handset
can be configured to manage the diversion locally instead of using the PBX. Requires
that the handset is within the coverage area and is switched on.
Select VoIP > SIP. In the Call forward locally drop-down list, select "Enable".
6.5.6 Battery Warning
1 Select Device > Settings
2In the Battery warning drop-down list, select one of the following:
• Sound repeatedly
•Sound once
•Sound off
1.Visible for i62 Messenger and i62 Protector only.