TD 92675GB
10 January 2011/ Ver. A
Configuration Manual
Ascom i62 VoWiFi Handset
1
1 Introduction
This document is a guide for installing, configuring and maintaining functionality of the i62
handsets.
The Ascom Voice over Wireless Fidelity (VoWiFi) system provides wireless IP-telephony,
messaging and alarm functions to enterprise LANs. Using third-party WLAN products as well
as in-house developed hardware and software, the system enables data and voice
transmission together with seamless roaming.
Figure 1. Ascom VoWiFi System
This document is intended as a guide when installing the Ascom i62 handset in a VoWiFi
system. The document describes the settings needed to make the i62 handset function in a
VoWiFi system and is relevant to the following personnel:
• System Administrator
• Service Technician
First configuration is done using the WinPDM. In small systems where it is possible to collect
all handsets to update settings, daily maintenance is also done by using the WinPDM. In
larger installations, the Device Manager in the Messaging and Services application (IMS2)
makes it possible to administrate the handsets centrally via a web interface without the
need to collect the handsets.
The Ascom i62 VoWiFi handset behaviour can be customized to suite each user profile.
It is recommended that the reader has basic knowledge of the Ascom VoWiFi system and
basic knowledge of handset registration in the PBX.
Figure 1.
AP
AP
Device Manager
in IMS2
Switch to IP Backbone/LAN/Internet
VoIP Gateway
PBX
WinPDM
VoWiFi Handset
IP-PBX
To Next Page
Loading...
Need help?
General
