ASCOM I62 - 5.3 The Admin Menu; 5.4 Handset Web Interface

TD 92675GB
10 January 2011/ Ver. A
Configuration Manual
Ascom i62 VoWiFi Handset
34
6.4.5 802.1X with EAP-FAST
To select EAP-FAST as the authentication method. Do the following:
1 Select Network > Network A (B, C, or D).
2 In the Security mode drop-down list., select “EAP-FAST”.
3 In the EAP authentication user name field, enter the user name for EAP
authentication.
4 In the EAP authentication password field, enter the password for EAP authentication.
6.4.6 802.1X with PEAP-MSCHAPv2
Select PEAP-MSCHAPv2 if root certificate is to be used for authentication. To select PEAP-
MSCHAPv2 as the authentication method. Do the following:
1 Ensure that the handset is online in WinPDM.
2 Import the root certificate by do the following:
•In the Numbers tab, right-click the handset’s number and select "Edit certificates".
An Edit certificate window opens.
•In the Root tab, click "Edit" and select the root certificates to import. Click "Close".
3 Select Network > Network A (B, C, or D)
4In the Security mode drop-down list, select “PEAP-MSCHAPv2”.
5In the EAP authentication user name field, enter the user name for EAP
authentication.
6In the EAP authentication password field, enter the password for EAP authentication.
6.4.7 EAP-TLS
Select EAP-TLS if a client certificate is to be used for authentication. To select EAP-TLS as the
authentication method, do the following:
1 Ensure that the handset is online in WinPDM.
2 Import the certificate by do the following:
•In the Numbers tab, right-click the handset’s number and select "Edit certificates".
An Edit certificate window opens.
•In the Root tab and Client tab, click "Edit" and select the certificates to import.
Click "Close".
3 Select Network > Network A (B, C, or D).
4In the Security mode drop-down list, select “EAP-TLS”.
5In the EAP client certificate drop-down list, select the client certificate to use.