ASCOM I62 - Page 53

TD 92675GB
10 January 2011/ Ver. A
Configuration Manual
Ascom i62 VoWiFi Handset
48
Push Button Alarm
1 Select "Alarm".
2 Select "Multiple-press" or "Long-press".
3In the Alarm type for multiple press drop-down list or Alarm type for longpress drop-
down list, select "Push button alarm 1".
4In the Number for automatic call after alarm field, enter the number to be called after
an alarm has been activated (optional).
5In the ALS drop-down list, select "Yes" if an Acoustic Location Signal shall sound when
the alarm has been activated.
6In the Text indication for alarm on multiple press field or Text indication for alarm on
long press, enter the text to be displayed in the handset when the alarm has been
activated.
7In the Mode for automatic call after alarm drop-down list, select one of the following:
• Monitor - The loudspeaker is muted and the microphone is on.
• Loudspeaker - The loudspeaker is turned on.
• Ordinary - The loudspeaker is turned off.
Test alarm
1 Select "Alarm".
2 Select "Multiple-press" or "Long-press".
3In the Alarm type for multiple press drop-down list or Alarm type for longpress drop-
down list, select "Test alarm".
4In the Number for automatic call after alarm field, enter the number to be called after
an alarm has been activated (optional).
5In the ALS drop-down list, select "Yes" if an Acoustic Location Signal shall sound when
the alarm has been activated.
6In the Text indication for alarm on multiple press field or Text indication for alarm on
long press, enter the text to be displayed in the handset when the alarm has been
activated.
7In the Mode for automatic call after alarm drop-down list, select one of the following:
• Monitor - The loudspeaker is muted and the microphone is on.
• Loudspeaker - The loudspeaker is turned on.
• Ordinary - The loudspeaker is turned off.
Emergency call alarm
If enabled, an alarm will be sent when the user calls the defined Emergency number (for
example 112).
1 Select Alarm > Emergency call.
2In the Emergency call alarm drop-down list, select one of the following:
• On - An alarm will be sent when the user calls the emergency number.
• Off - No alarm will be sent when the user calls the emergency number.
3In the Alarm type text field,enter the text to be displayed in the handset when the
alarm has been activated.
4 Select Device > Call.