Ch. 21. Shipping or Moving Sec. 21.4. Shipping a Complete Cypher AFM System
21.4.5. Enclosure: Packaging
STOP!! Call or otherwise contact Asylum Research and talk to us before moving anything. Chances
are that with a few phone calls and the help of this chapter you can do the job yourself. Not calling us
will likely result in instrument damage, costly repairs and downtime, and the voiding of your warranty.
Materials
991.015: Cardboard Carton 21” X 20” X 21”
991.015: Foam (Cypher Enclosure)
Kapton Tape (1/2” or 3/4”)
Tools 290.134: 3/32” Hex Driver
Final Wt 90 lbs / 41 kg
Minimum Preparation System Shut Down: (
Section 21.3 on page 238)
Scanner Removal: (Section 21.4.1 on page 239)
Enclosure Top Removal: (
Section 21.4.2 on page 242)
Backpack Removal: (Section 21.4.3 on page 244)
Chassis Removal: (Section 21.4.4 on page 246)
1.
Secure all 3 cables inside the enclosure by
taping them down to the center floor with
Kapton Tape.
2.
The right door of the enclosure should still be
open. With the door open, put the roof of the
enclosure back on by setting it back ½ down
first and then using the dowels and the 2 holes
in the top front to guide you.
3. When the roof is on completely, shut the door on the right side carefully.
BETA
Page 248
To Next Page
Loading...