56
⚫ Brake disc check – displays only the brake disc wear.
2) Braking distance – displays the stopping distance for the test vehicle
graphically with the corresponding tire tread depth. The braking distance
varies with the type of tires changed accordingly. This section also followed
by wear analysis and maintenance suggestions.
⚫ Quick check – specially contains analysis of brake disc wear.
⚫ Brake disc check – Braking distance is available for all check modes,
except for Brake disc mode.
The following three tire-related sections are provided in all the check
modes except for the Brake disc one:
3) Tire condition – presents with nine tire status, including normal, worn,
bulge, etc.
4) Tire DOT – scans the tire DOT serial number located on the sidewall to
acquire basic characteristics such as tire age, recall status, and warning.
Refer to Tire DOT on page 124 for additional information.
5) Tire specification – presents a series of options regarding tire
characteristics, including Make, Tire width, Type code, and etc.
NOTE
On the Details screen, the measurements are shown graphically and
changes colors with the Tire condition manually selected to provide a more
comprehensive analysis.
To Next Page
Loading...
