Avaya 3500 series - Chapter 5: Configuring the Management IP Address; Setting the IP Address; Network Configuration (IP & DNS)

Chapter 6: Network monitoring
configuration using Enterprise
Device Manager
This chapter describes how to use Enterprise Device Manager (EDM) to configure system logging and to
display chassis and port statistics for the Avaya Ethernet Routing Switch 3500 Series.
Displaying CPU and memory utilization using EDM
Use this procedure to view both CPU and memory utilzation.
Procedure
1. In the navigation tree, double-click Edit.
2. In the Edit tree, double-click Chassis.
3. In the Chassis tree. double-click Chassis.
4. In the work area, click the CPU/Mem Utilization tab to display a table of CPU and
memory utilization information for a switch.
5. On the toolbar, click Refresh to update the data.
CPU Mem Utilization tab field descriptions
The following table describes the fields on the CPU/Mem Utilization tab.
Name
Description
Unit Displays the numerical representation of the
unit
Last10Seconds Displays CPU usage, in percentage, for the
last 10 seconds
Last1Minute Displays CPU usage, in percentage, for the
last minute
Configuration — System Monitoring March 2013 41