5. On the toolbar, click Delete.
6. Click Yes to delete the event or click No to return to the Events tab.
Displaying RMON log information using EDM
Use this procedure to open and view information in the Log tab.
Procedure
1. In the navigation tree, double-click Rmon.
2. In the RMON tree, double-click Alarms.
3. In the work area, click the Log tab.
Log tab field descriptions
The following table describes the fields on the Log tab.
Name
Description
Time Displays the value of sysUpTime after this
log entry was created.
Description Displays an implementation-dependent
description of the event that activated the log
entry.
EventIndex Displays the index of the event entry.
Displaying RMON log information using EDM
Configuration — System Monitoring March 2013 95
To Next Page
Loading...
