Displaying Port Mirroring using EDM
Use this procedure to troubleshoot the network.
Procedure
1. In the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostics tree, double-click Port Mirrors.
Port Mirrors tab field descriptions
The following table describes the fields on the Port Mirrors tab.
Name Description
Instance Indicates the Port Mirroring instance
number.
Release 5.0 supports only 1 instance.
PortMode Indicates the supported Port Mirroring
modes. The modes are:
• Xrx— monitors all traffic received on port
X.
• XrxOrXtx— monitors all traffic received or
transmitted on port X.
• Xtx — monitors all traffic transmitted on
port X.
MonitorPort Indicates the switch port to designate as the
monitor port.
PortListX Indicates the switch port to be monitored by
the designated monitor port. This port is
monitored according to the value X in the
Monitoring Mode field.
Configuring Port Mirroring using EDM
Use this procedure to help you troubleshoot the network.
Network monitoring configuration using Enterprise Device Manager
52 Configuration — System Monitoring March 2013
Comments? infodev@avaya.com
To Next Page
Loading...
