8. On the toolbar, click a graph type.
Graphing interface statistics
Use this procedure to display and graph interface parameters for a port.
Procedure
1. On the Device Physical View, click on a port.
2. In the navigation tree, double-click Graph.
3. In the Graph tree, double-click Port.
4. In the work area, click the Interface tab.
5. Click a row of data to graph under a column heading.
6. On the toolbar, click the Poll Interval and select an interval.
7. On the toolbar, you can reset the data by clicking Clear Counters.
8. On the toolbar, click a graph type.
Interface tab field descriptions
The following table describes the fields on the Interface tab.
Name
Description
InOctets Displays the total number of octets received
on the interface, including framing
characters.
OutOctets Displays the total number of octets
transmitted out of the interface, including
framing characters.
InUcastPkts Displays the number of packets delivered by
this sublayer to a higher sublayer that are not
addressed to a multicast or broadcast
address at this sublayer.
OutNUcastPkts Displays the total number of packets that
higher-level protocols requested be
transmitted, and that are addressed to a
multicast or broadcast address at this
sublayer, including those that are discarded
or not sent.
Displaying port statistics using EDM
Configuration — System Monitoring March 2013 63
To Next Page
Loading...
