Name Description
ifOutUcastPkts, ifOutMulticastPkts, or
ifOutBroadcastPkts, and is not counted by
the corresponding instance of the
SingleCollisionFrames object.
LateCollisions Specifies the number of times that a collision
is detected on a particular interface later than
512 bit-times into the transmission of a
packet. Five hundred and twelve bit-times
corresponds to 51.2 microseconds on a 10
Mb/s system. A (late) collision included in a
count represented by an instance of this
object is also considered as a (generic)
collision for purposes of other collision-
related statistics.
ExcessiveCollisions Specifies a count of frames for which
transmission on a particular interface fails
due to excessive collisions.
Graphing miscellaneous statistics using EDM
Use this procedure to view and graph statistics from the Misc.Stats tab.
Procedure
1. On the Device Physical View, click on a port.
2. In the navigation tree, double-click Graph.
3. In the Graph tree, double-click Port.
4. In the work area, click the Misc. Stats tab.
5. Click a row of data to graph under a column heading.
6. On the toolbar, click the Poll Interval and select an interval.
7. On the toolbar, you can reset the data by clicking Clear Counters.
8. On the toolbar, click a graph type.
Network monitoring configuration using Enterprise Device Manager
68 Configuration — System Monitoring March 2013
Comments? infodev@avaya.com
To Next Page
Loading...
