Name Description
PortListX Specifies the switch port to be monitored by
the designated monitor port. This port is
monitored according to the value X in the
Monitoring Mode field.
Graphing chassis statistics using EDM
Use this procedure to graph chassis statistics.
Procedure
1. In the navigation tree, double-click Graph.
2. In the Graph tree, double-click Chassis. The Graph Chassis dialog box appears
with the SNMP tab displayed.
3. Click a row of data to graph under a column heading.
4. On the toolbar, click the Poll Interval and select an interval.
5. On the toolbar, you can reset the data by clicking Clear Counters.
6. On the toolbar, click a graph type.
Displaying IP statistics using EDM
Use this procedure to view and graph IP statistics.
Procedure
1. In the navigation tree, double-click Graph.
2. in the Graph tree, double-click Chassis.
3. In the work area, click the IP tab.
4. Click a row of data to graph under a column heading.
5. On the toolbar, click the Poll Interval and select an interval.
6. On the toolbar, you can reset the data by clicking Clear Counters.
7. On the toolbar, click a graph type to graph the IP statistics.
Network monitoring configuration using Enterprise Device Manager
54 Configuration — System Monitoring March 2013
Comments? infodev@avaya.com
To Next Page
Loading...
