Name Description
timed out, errors). This is not necessarily a
count of discarded IP fragments because
some algorithms (notably the algorithm in
RFC815) can lose track of the number of
fragments by combining them as they are
received.
Displaying ICMP In statistics using EDM
Use this procedure to open the ICMP In tab to view and graph ICMP In statistics.
Procedure
1. In the navigation tree, double-click Graph.
2. In the Graph tree, double-click Chassis.
3. In the work area, click the ICMP In tab.
4. Click the row of data to graph under a column heading.
5. On the toolbar, click the Poll Interval and select an interval.
6. On the toolbar, you can reset the data by clicking Clear Counters.
7. On the toolbar, click a graph type.
ICMP Intab field descriptions
The following table describes the fields on the ICMP In tab.
Name
Description
SrcQuenchs Displays the number of ICMP Source
Quench messages received.
Redirects Displays the number of ICMP Redirect
messages received.
Echos Displays the number of ICMP Echo (request)
messages received.
EchoReps Displays the number of ICMP Echo Reply
messages received.
Timestamps Displays the number of ICMP Timestamp
(request) messages received.
Graphing chassis statistics using EDM
Configuration — System Monitoring March 2013 57
To Next Page
Loading...
