Avaya 3500 series - Displaying Switch Fan Information Using EDM; Displaying Switch Temperature Using EDM

Displaying switch fan information using EDM
Use this procedure to display information about the operating status of the switch fans.
Procedure
1. In the navigation tree, double-click Edit .
2. In the Edit tree, click Chassis.
3. In the Chassis tree, click Environment.
4. On the work area, click the Fan tab.
5. On the toolbar, click Refresh to update the information.
Fan tab field descriptions
The following table describes the fields on the Fan tab.
Name
Description
Unit 1 Fan 1 Indicates the status of Fan 1.
Unit 1 Fan 2 Indicates the status of Fan 2.
Unit 1 Fan 3 Indicates the status of Fan 3.
Unit 1 Fan 4 Indicates the status of Fan 4.
Displaying switch temperature using EDM
Use this procedure to display switch temperature information.
Procedure
1. In the navigation tree, double-click Edit.
2. In the Edit tree, click Chassis.
3. In the Chassis tree, click Environment.
4. In the work area, click the Temperature tab.
Displaying switch fan information using EDM
Configuration — System Monitoring March 2013 43