Variable definitions
The following table describes the parameters for the rmon stats command.
Variable Value
[no] Disable RMON statistics. When the variable
is omitted, all entries in the table are cleared
<1–65535> Specifies the unique index for the stats entry
[owner]<LINE> Specifies the owner string to identify the stats
entry
Displaying Environmental Status using ACLI
View the Environmental status of the switch.
Procedure
1. Log on to ACLI in User EXEC command mode.
2. At the command prompt, enter the following command:
show environmental
Note:
You can use the command from Global Configuration mode or User EXEC
mode.
Example
The following figure provides a sample of show environmental command.
3510GT-PWR+#show environmental
Unit# FAN1 FAN2 FAN3 FAN4 Temperature
----- ---- ---- ---- ---- -----------
1 OK N/A N/A N/A OK 39.5C
3510GT-PWR+#
RMON using ACLI
78 Configuration — System Monitoring March 2013
Comments? infodev@avaya.com
To Next Page
Loading...
