Avaya 3500 series - Configuring RMON Statistics Settings Using ACLI

[no] rmon history <1–65535> <LINE> <1–65535> <1–3600> [owner
<LINE>]
Variable definitions
The following table describes the parameters for the rmon history command.
Variable Value
[no] Deletes RMON history table entries
<1–65535> Specifies the unique index for the history
entry
<LINE> Specifies the port number to be monitored
<1–65535> Specifies the number of history buckets
(records) to keep.
<1–3600> Specifies the sampling rate (how often a
history sample is collected).
[owner]<LINE> Specifies the owner string to identify the
history event
Configuring RMON Statistics Settings using ACLI
Configure RMON statistics settings
Procedure
1. Log on to ACLI in Global Configuration command mode.
2. At the command prompt, enter the following command:
[no] rmon stats <1–65535> <LINE> [owner <LINE>]
Configuring RMON Statistics Settings using ACLI
Configuration — System Monitoring March 2013 77