Creating an event using EDM
Use this procedure to create an event.
Procedure
1. In the navigation tree, double-click Rmon.
2. In the RMON tree, double-click Alarms.
3. In the work area, click the Events tab.
4. On the toolbar, click Insert.
5. In the Index box, type the index for the event.
6. In the Description box, type the description of the event.
7. In the Type section, click a type option button.
To designate the event type to
• save memory — specify the event type as log
• reduce traffic from the switch or improve CPU utilization — specify the event
type as snmp-trap
Important:
If you select an event type of snmp-trap or log-and-trap, you must set trap
receivers.
8. In the Community box, type a community.
9. In the Owner box, type an owner.
10. Click Insert.
Deleting an event using EDM
Use this procedure to delete an event.
Procedure
1. In the navigation tree, double-click Rmon.
2. In the RMON tree, double-click Alarms.
3. In the work area, click the Events tab.
4. Click a row to delete.
RMON using Enterprise Device Manager
94 Configuration — System Monitoring March 2013
Comments? infodev@avaya.com
To Next Page
Loading...
