Name Description
reasons other than the lack of an application
at the destination port.
OutDatagrams Displays the total number of UDP datagrams
sent from this entity.
HCInDatagrams Displays the number of TCP connections for
which the current state is either
ESTABLISHED or CLOSE-WAIT.
HCOutDatagrams Displays the number of UDP datagrams sent
from this entity, for devices that can transmit
more than 1 million UDP datagrams for each
second. Discontinuities in the value of this
counter can occur at reinitialization of the
management system, and at other times as
indicated by discontinuities in the value of
sysUpTime.
Displaying port statistics using EDM
You can graph the following types of statistics for a port:
• AbsoluteValue
• Cumulative
• Average/sec
• Minimum/sec
• Maximum/sec
• LastVal/sec
Use this procedure to open the graphPort dialog box for graphing.
Procedure
1. On the Device Physical View, click on the port you want to graph.
2. In the navigation tree, double-click Graph.
3. In the Graph tree, double-click Port.
4. In the work area, click the tab for the data type you want to view and graph.
5. Click a row of data to graph under a column heading.
6. On the toolbar, click the Poll Interval and select an interval.
7. On the toolbar, you can reset the data by clicking Clear Counters.
Network monitoring configuration using Enterprise Device Manager
62 Configuration — System Monitoring March 2013
Comments? infodev@avaya.com
To Next Page
Loading...
