Avaya 3500 series - Displaying RMON Packets for a Port Using ACLI; Displaying RMON Statistics for a Port Using ACLI

Displaying RMON Packets for a Port using ACLI
Display RMON packets for all ports or specific ports.
Procedure
1. Log on to ACLI in Global Configuration command mode.
2. At the command prompt, enter the following command:
show rmon ethernet packets [port <LINE>]
Variable definitions
The following table describes the parameters for the show rmon ethernet packets
port command.
Variable
Value
LINE Specifies a list of ports
Displaying RMON Statistics for a Port using ACLI
Displays RMON statistics for all or specific ports..
Procedure
1. Log on to ACLI in Global Configuration command mode.
2. At the command prompt, enter the following command:
show rmon ethernet statistics [port <LINE>]
Displaying RMON Packets for a Port using ACLI
Configuration — System Monitoring March 2013 73