5. On the toolbar, click Refresh to update the data.
Temperature tab field descriptions
The following table describes the fields on the Temperature tab.
Name Description
Unit Indicates the number of the switch.
DEFAULT: 1
Temperature Indicates the switch unit operating
temperature.
Configuring remote system logging using EDM
Use this procedure to configure and manage the logging of system messages.
Procedure
1. In the navigation tree, double-click Edit.
2. In the Edit tree, click Diagnostics.
3. In the Diagnostics tree, click System Log.
4. In the work area, click the Remote System Log tab to display the Remote System
Log Information.
5. In the RemoteSyslogAddressType field, choose the type of IP address for the
primary remote system log server.
6. In the RemoteSyslogAddress box, enter the IP address for the primary remote
system log server.
7. OPTIONAL: In the SecondarySyslogAddressType field, choose the type of IP
address for the secondary remote system log server.
8. OPTIONAL: In the SecondarySyslogAddress box, enter the IP address for the
secondary remote system log server.
9. Do one of the following:
• Select the Enabled check box to enable remote system logging.
• Clear the Enabled check box to disable remote system logging.
Network monitoring configuration using Enterprise Device Manager
44 Configuration — System Monitoring March 2013
Comments? infodev@avaya.com
To Next Page
Loading...
