4. In the work area, click the System Logs tab to display the System Logs
information.
System Logs tab field descriptions
The following table describes the fields on the System Logs tab.
Name Description
OrigUnitNumber Specifies the unit number of the originator of
the log message.
MsgTime Specifies the time (in hundredths of a
second) between system initialization and
the time this log message was entered into
the system.
MsgIndex Specifies the arbitrary integer index
assigned to the log message upon entry into
the message facility.
MsgSrc Specifies the message source that indicates
whether this message is loaded from
nonvolatile storage at system initialization or
whether the message is generated after that
time.
MsgString Specifies a printable string indicating the
originator of and the reason why a log
message is generated. This string, coupled
with the log message parameters that are
associated with the message, provides an
understanding of the log message.
MsgType Specifies the type of system message.
Displaying network topology information using EDM
Use this procedure to display network topology information.
Procedure
1. From the navigation tree, double-click Edit.
2. In the Edit tree, click Diagnostics.
3. In the Diagnostics work area, click the Topology tab.
Displaying network topology information using EDM
Configuration — System Monitoring March 2013 49
To Next Page
Loading...
