Procedure
1. In the navigation tree, double-click Rmon.
2. In the RMON tree, double-click Alarms.
3. In the work area, click the Events tab.
Events tab field descriptions
The following table describes the fields on the Events tab.
Name Description
Index This index uniquely identifies an entry in the
event table. Each entry defines one event
that is to be generated after the appropriate
conditions occur.
Description Specifies whether the event is a rising or
falling event.
Type The type of notification that Enterprise
Device Manager provides about this event.
In the case of log, an entry is made in the log
table for each event. In the case of trap, an
SNMP trap is sent to one or more
management stations. Possible notifications
are as follows:
• none
• log
• trap
• log-and-trap
Community The SNMP community string acts as a
password. Only those management
applications with this community string can
view the alarms.
LastTimeSent The value of sysUpTime at the time this
event entry last generated an event. If this
entry has not generated any events, this
value is zero.
Owner If traps are specified to be set to the owner,
this field specifies the name of the machine
that receives alarm traps.
Using RMON events
Configuration — System Monitoring March 2013 93
To Next Page
Loading...
