Avaya 3500 series - Page 53

Procedure
1. In the navigation tree, double-click Edit.
2. In the Diagnostics tree, double-click Port Mirrors.
3. On the toolbar, click Insert.
The insert Port Mirrors dialog box appears.
4. In the instance box, type 1.
5. In the PortMode section, click one of the option buttons.
6. Beside the MonitorPort box, click the elipsis(...).
The Port Editor: Monitor Port list appears.
7. Click a port.
8. Click Ok.
9. Beside the dimmed PortListX box, click the elipsis(...).
The Port Editor: portlistX list appears.
10. Click a port.
11. Click Ok.
12. Click Insert.
Port Mirrors tab field descriptions
The following table describes the fields on the Port Mirrors tab.
Name
Description
Instance Specifies the Port Mirroring instance
number.
Release 5.0 supports only 1 instance.
PortMode Specifies the supported Port Mirroring
modes. The modes are:
• Xrx— monitors all traffic received on port
X.
• XrxOrXtx— monitors all traffic received or
transmitted on port X.
• Xtx — monitors all traffic transmitted on
port X.
MonitorPort Specifies the switch port to designate as the
monitor port.
Port Mirroring using EDM
Configuration — System Monitoring March 2013 53