Name Description
specify off, the system discontinues log
message accumulation.
Important:
This does not affect operation of the
remote syslog facility; it only determines
whether log messages are stored locally.
BufferFullAction Specifies the action to take when buffer
space is exhausted.
Overwrite causes the previous messages to
be overwritten. Messages are overwritten
based on First in First Out (FIFO).
Specifying latch causes no more messages
to be saved until this object is changed to
overwrite or until the buffer space is made
available through some other means (for
example, clearing the buffer).
Volatile —CurSize Displays the current number of log
messages in the volatile portion of the
system log messages facility.
Messages that are classified as volatile are
lost upon system reinitialization.
Volatile —SaveTargets Determines the type of log messages that
are saved in the log message buffer facilities.
Messages are classified based on their type
as follows:
• critical
• critical/serious
• critical/serious/inform
• none
Selecting the type causes all log messages
with an associated value less than or equal
to the type value specified to be saved after
the log message is entered in the system.
For example, specifying the value critical
causes only messages classified as critical
to be saved to nonvolatile storage.
Specifying critical/serious causes critical and
serious messages to be saved. Specifying a
value of none means no log messages are
stored in volatile memory.
non-Volatile —CurSize Displays the current number of log
messages that are present in the nonvolatile
portion of the system log message facility.
Displaying system log settings using EDM
Configuration — System Monitoring March 2013 47
To Next Page
Loading...
