• Max/sec — The maximum average for the counter for a given polling interval over the
cumulative elapsed time.
• Last/Val/sec — The average for the counter over the last polling interval.
Perform this procedure to view RMON Ethernet statistics.
Procedure
1. On the Device Physical View, lick on a port.
2. In the navigation tree, double-click Graph.
3. In the Graph tree, double-click Port.
4. In the work area, click the RMON tab.
5. Click the row of data to graph under a column heading.
6. On the toolbar, click the Poll Interval and select an interval.
7. On the toolbar, you can reset the data by clicking Clear Counters.
8. On the toolbar, click a graph type.
RMON tab field descriptions
The following table describes the fields on the RMON tab.
Name
Description
Octets Displays the total number of octets of data
(including those in bad packets) received on
the network (excluding framing bits but
including FCS octets). You can use this
object as a reasonable estimate of Ethernet
utilization. For greater precision, sample the
etherStatsPkts and etherStatsOctets objects
before and after a common interval.
Pkts Displays the total number of packets
(including bad packets, broadcast packets,
and multicast packets) received.
BroadcastPkts Displays the total number of good packets
received that are directed to the broadcast
address. This does not include multicast
packets.
MulticastPkts Displays the total number of good packets
received that are directed to a multicast
RMON using Enterprise Device Manager
80 Configuration — System Monitoring March 2013
Comments? infodev@avaya.com
To Next Page
Loading...
