Avaya 3500 series - Page 86

Variable Value
default Configures AES to default value (disabled).
enable Enables AES for the accessed port.
no Disables AES for the accessed port, an alternate port, or list of
ports.
port <portlist> enable Enables AES for a port or list of ports.
Activating or deactivating AES manually using ACLI
Use the following procedure to have AES enabled, but not activated. Activate AES to ensure that
AES is enabled and activated.
Before you begin
• Disable AES globally.
Procedure
1. Enter Privileged EXEC mode:
enable
2. Activate AES.
energy-saver activate
3. Deactivate AES.
energy-saver deactivate
Configuring AES scheduling using ACLI
Use the following procedure to configure an on and off time interval for the switch to enter lower
power states. The time interval can be a complete week, complete weekend, or individual days.
Before you begin
• Disable AES globally.
Procedure
1. Enter Global Configuration mode:
enable
configure terminal
2. Configure AES scheduling.
energy-saver schedule {weekday|weekend|monday|tuesday | wednesday|
thursday|friday|saturday|sunday} <hh:mm> {activate|deactivate}
Configuring the switch using ACLI
86 Getting Started with Avaya ERS 3500 Series July 2015
Comments on this document? infodev@avaya.com