Using PIM to manage SLS administration on the Branch Gateway on page 133
SLS ARS Entry page field descriptions on page 135
PIM Device Profile Wizard buttons on page 137
Enabling SLS on page 138
Disabling SLS on page 138
Activating changes in SLS on page 138
Prerequisites for using the CLI to manually configure SLS administration on the Branch
Gateway on page 139
SLS data set preparation on page 139
SLS capacities on page 140
Collecting analog stations data on page 140
Collecting DCP stations data on page 141
Collecting IP stations data on page 143
Collecting trunk groups data on page 144
Trunk Group screen field descriptions on page 145
Collecting DS1 trunks data on page 147
DS1 circuit pack field descriptions on page 148
Collecting signaling groups data on page 153
Signaling Group field descriptions on page 153
Collecting administered ISDN-BRI trunks data on page 154
ISDN-BRI Trunk field descriptions on page 155
Collecting Feature Access Codes data on page 156
Feature Access Code field descriptions on page 157
Collecting system parameters data on page 159
Codecs supported in SLS on page 159
General system parameters field descriptions on page 159
Collecting ARS dial patterns data on page 160
ARS Dial Patterns field descriptions on page 161
Collecting Incoming Call Handling data on page 161
Incoming call handling data field descriptions on page 162
Configuration of the SLS data through the CLI on page 163
Creating the SLS administration data set on the Branch Gateway on page 164
Administering station parameters on page 166
Class values in SLS station context on page 168
Module-port values in SLS station configuration mode on page 169
Administering DS1 parameters on page 170
ISDN Layer 3 country codes on page 172
ISDN Layer 3 country protocols for ISDN Primary Rate service on page 173
Administering BRI parameters on page 174
Trunk group assignment on page 176
Administering trunk-group parameters on page 176
Standard Local Survivability (SLS)
Administering Avaya G430 Branch Gateway October 2013 119
To Next Page
Loading...
