Avaya S8700 Installing

326 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Installing the Avaya™ S8700

Media Server with Avaya™

MCC1 or SCC1 Media Gateways

Release 1.3

Issue 1

May 2003

Table of Contents

Configure Media Server1
- Power up Media Server1
  - Laptop to Media Server1
- Disconnect from Media Server1
- Table of Contents5
Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway15
Pre-Installation Setup17
High Level Overview of Installation Process18
- Install and Configure the S8700 Media Server Complex18
- Customize the S8700 Media Server18
- Installation of the Media Gateways18
- Cable the Media Gateways19
- Connect the Media Gateway to the Server Complex19
- Connect to the Customer's LAN19
- Install and Wire Telephones19
- Complete the Installation19
- Testing the Complete Configuration19
Download License and Avaya Authentication Files20
- RFA Information Requirements for New Installations20
- Go to the RFA Web Site21
Mount the Hardware in the Rack22
- Connect the USB Modems22
  - Co-Located Servers22
  - Separated Servers22
Configure the Hardware in the Rack23
- Set Product ID24
- Connect and Log into the Web Interface25
  - Using Netscape26
  - Using Internet Explorer27
- Set Date and Time27
- Verify Software Version27
- Set Media Server Configuration Type28
- Upgrade Media Server Software (if Necessary)28
- Continue Server 1 Configuration29
- Install License and Avaya Authentication Files33
  - Copy License and Avaya Authentication Files from33
  - Install the License and Avaya Authentication Files34
- Verify Media Server 1 Connection to Customer's LAN (if Provided)35
- Test Media Server 1 Leds37
- Configure SNMP Traps38
- Disconnect from Media Server 139
Connect Duplication Cables40
- Collocated Media Servers40
- Separated Media Servers40
Configure Media Server 241
- Verify Software Version42
- Set Server Configuration Type42
- Upgrade Media Server Software (if Necessary)42
- Continue Server 2 Configuration43
- Verify Media Server 2 Connection to Customer's LAN (if Provided)46
- Test Media Server 2 Leds47
- Disconnect from Media Server 247
Connect UPS Ethernet Cables to Ethernet Switch48
Configure the SNMP Modules in the Upss49
- Duplex Reliability Configurations51
- High/Critical Reliability Configurations51
- Setting Selected Traps (Alarming)52
Configure the SNMP Subagent in the Avaya Ethernet Switch (if Used)53
Customize the Active Media Server55
- Start Terminal Emulation55
- Input Translations56
- Reset Media Server56
- Add Media Gateways56
- Administer and Enable the IP Server Interface57
- Add IPSI Translations to Communication Manager58
Install the Media Gateways60
- Check and Inspect the Order62
- Connect AC Power and Ground67
  - Approved Grounds67
- Installing an Avaya MCC1 Media Gateway68
- Cabling the MCC1 Media Gateways-CSS94
- Installing an Avaya SCC1 Media Gateway Stack98
- Installing the Avaya G700 Media Gateway125
Install Main Distribution Frame127
- Space Requirements and Layout128
  - Installation Space Requirements128
  - Layout129
- Install Main Distribution Frame Hardware131
- MDF Cross-Connect Fields134
- Placing the Main Distribution Frame134
- Main Distribution Frame Labels136
- Mount 110A- or 110P-Type Terminal Blocks on the Wall137
- Mount 110P-Type Terminal Blocks on a Frame139
- Install Cable Slack Managers141
Connect the Media Gateway to the MDF144
- Equipment Room Cabling Labels144
- Cable Routing Guidelines145
- Control Carrier Outputs Cable Installation145
- Trunk Cables Among Network Interface, Sneak Fuse Panel, and Media Gateway146
- Install Cables between Media Gateway and MDF148
- Install Connector Cables between Auxiliary Cabinet (if Used) and MDF149
Connect the MDF to Stations and PSTN150
- Station (Telephone) Wiring Design150
- Information Outlets150
- Station Cables150
- Closets152
  - Satellite Locations152
  - Site Locations153
- Station Circuit Distribution from Equipment Room153
  - 4-Pair Station Circuits154
  - 3-Pair to 4-Pair Station Circuit Distribution154
- Connected Cable Station Adapters158
- Complete Provisioning Plan161
- Install Sneak Current and off Premise Protection163
  - Install Sneak Fuse Panels166
- Install the Coupled Bonding Conductor167
  - Install Coupled Bonding Conductor Wires167
  - Install Coupled Bonding Conductor168
- Install and Administer the Patch Cord/Jumper170
Installing the Stratum 3 Clock (if Used)177
- Unpack and Inspect Stratum 3 Clock Cabinet177
- Install and Position Stratum 3 Clock Cabinet177
- Connect AC Power to Stratum 3 Clock Cabinet178
- Check and Connect Commercial AC Power178
- Connect DC Power and Ground to Stratum 3 Clock Cabinet178
- Connect Clock Cabinet Grounding178
- Connect Stratum 3 Clock DC Power178
- Set the Clock Options179
- Cable the Stratum 3 Clock180
- Install the Stratum 3 Clock Wiring182
Install Auxiliary Cabinet (Optional)186
- Unpack and Inspect the Auxiliary Cabinet186
- Position the Auxiliary Cabinet186
- Install Auxiliary Cabinet Equipment187
Connecting to the Ipsis188
- Connect the Ethernet Switch Cables to the IPSI Circuit Packs188
  - Avaya MCC1 Media Gateway188
  - Avaya SCC1 Media Gateway188
- Connect Avaya SCC1 Media Gateway IPSI and Maintenance Circuit Pack Ribbon Cables194
- Program the IPSI Circuit Packs200
- Using DHCP Addressing201
- Using Static Addressing203
- Verify Connectivity to the Media Servers206
- Upgrade IPSI Firmware Version (if Necessary)207
- Enable Control of Ipsis207
- Verify License Status208
Connecting to the Customer's Network209
- Avaya S8700 Media Server209
- TN799DP Control LAN210
- The TN2302AP IP Media Processor211
- The TN801B MAP-D LAN Gateway211
- TN2501 Voice over the LAN (VAL)211
  - Important File Specifications212
  - Caveats212
Installing and Wiring Telephones214
- Wiring Telephones214
- Connect Telephones215
- Analog Tie Trunk Example219
- Digital Tie Trunk Example220
- DS1 Tie Trunk Example221
  - Collocated DS1 Tie Trunks221
  - DS1 Tie Trunks Using T1 Channel Service Unit221
- Auxiliary Connector Outputs (MCC1 and SCC1 Media Gateways Only)224
- Three-Pair and Four-Pair Modularity227
- Adjunct Power Connection Locations228
- Attendant Console Example229
- Connect External Alarm Indicators and Auxiliary Power232
- Connect Power Distribution Unit External Alarm Wires233
- Install Off-Premises Station Wiring236
- Off-Premises or Out-Of-Building Stations236
- Off-Premises Connections237
- Emergency Transfer Units and Associated Telephones242
- Emergency Transfer Panel and Telephone Installation Examples243
- Install External Ringing252
- Install the Queue Warning Indicator253
Installing and Wiring Telephone Power Supplies254
- 1145B2 Power Supply254
- 1152A1 MID-Span Power Distribution Unit263
- P333T-PWR Power over Ethernet Stackable Switch267
- 1151B1 and 1151B2 Power Supplies269
Completing the Installation Administration272
- Verify Translations272
- Set Daylight Savings Time Rules272
- Set Locations (if Necessary)273
- Verify Date and Time274
- View Alarms275
- Enable and Disable Ethernet Switch Ports276
- Back up the Media Server to PCMCIA Flashcard277
- View Alarms279
- Set Product ID279
- Add INADS Phone Numbers280
- Enable Alarms to INADS Via Modem280
- Enable Alarms to INADS Via SNMP281
- Register the System281
Accessing the Avaya S8700 Media Server282
- Connecting to the Avaya S8700 Media Server Directly282
- Connecting to the Avaya S8700 Media Server Remotely over the Network284
- Connecting to the Avaya S8700 Media Server Remotely over a Modem284
- Using the Various Interfaces285
- Logins288
- Network Configuration288
  - Windows 95/98/NT4.0/ME Instructions288
  - Windows 2000/XP Instructions288
Testing the Complete Configuration290
- Testing Port Network Equipment291
- Testing Telephones and Other Equipment297
- LED Indicators302
Troubleshooting an Installation315
- Configuring the Media Server Hardware316
- Installing the License and Avaya Authentication Files317
Index319

Other manuals for Avaya S8700

Manual212 pages

Maintenance Manual2618 pages

Overview Guide40 pages

Maintenance700 pages

Installation Instructions298 pages

Installing Manual342 pages

Installing Guide236 pages

Quick Start For Hardware Installation28 pages

Getting Started20 pages

Application Notes10 pages

Installation Tool Information5 pages

Job Aid14 pages

Replacing Guide20 pages

Questions and Answers:

Need help?

Do you have a question about the Avaya S8700 and is the answer not in the manual?

Avaya S8700 Specifications

General

Brand	Avaya
Model	S8700
Category	Server
Language	English

Related product manuals

Preview: Avaya S8700 Series

Avaya S8700 Series

Preview: Avaya S8730

Preview: Avaya S8400

Preview: Avaya S8300

Preview: Avaya S8800

Preview: Avaya S8500

Preview: Avaya S8300 Series

Avaya S8300 Series

Preview: Avaya S8100 Series

Avaya S8100 Series

Preview: Avaya Scopia

Avaya Definity SI

Avaya CallPilot 1006r