Avaya S8700 - Page 10

10
Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Contents
May 2003
• Install Auxiliary Cabinet (Optional) 186
Unpack and Inspect the Auxiliary Cabinet 186
Position the Auxiliary Cabinet 186
Install Auxiliary Cabinet Equipment 187
• Connecting to the IPSIs 188
Connect the Ethernet switch cables to the IPSI circuit packs 188
Avaya MCC1 Media Gateway 188
Avaya SCC1 Media Gateway 188
Connect Avaya SCC1 media gateway IPSI and
maintenance circuit pack ribbon cables 194
Program the IPSI circuit packs 200
Using DHCP addressing 201
Using static addressing 203
Verify connectivity to the media servers 206
Upgrade IPSI firmware version (if necessary) 207
Enable control of IPSIs 207
Verify License Status 208
• Connecting to the Customer’s Network 209
Avaya S8700 Media Server 209
TN799DP Control LAN 210
The TN2302AP IP Media Processor 211
The TN801B MAP-D LAN Gateway 211
TN2501 Voice over the LAN (VAL) 211
Important file specifications 212
Caveats 212
• Installing and Wiring Telephones 214
Wiring Telephones 214
Connect Telephones 215
Connectable Telephones and Consoles 215
Connecting a Typical Telephone 216
Connect Adjunct Power 217
Connect an Analog Station or 2-Wire Digital Station 218
Analog Tie Trunk Example 219
Digital Tie Trunk Example 220
DS1 Tie Trunk Example 221
Collocated DS1 Tie Trunks 221
DS1 Tie Trunks Using T1 Channel Service Unit 221