109
Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
May 2003
Typical DC Power Connections
Figure notes
1 Media Gateway Stack
2 DC Power Cabinet
3 White Wires
4 Green Ground Wires and Black Wires
Connect to the -48 VDC Return Bus
5 -48 VDC Bus
6 Connect White Wires to Circuit Breakers
7 DC Power Cable (H600-436, G1) to
Power Connector on Each Media
Gateway. Cut to Length and Crimp a
Ring Terminal Onto Each Wire
8 30 Feet (9 m) Maximum
9 Route Cables Through Sliding
Door
10 Circuit Breaker
11 Supplied #10-32 Screw, #10 Star
Washer, and #10-32 Hex Nut
12 Inset Showing DC Power
Connector (Male)
To Next Page
Loading...
