110
Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
May 2003
Connections Using DC Power Distribution Unit
Figure notes
1 Media Gateway Stack
2 DC Power Cabinet
3 DC Power Distribution Unit (position
to right of the media gateway stack
4 White Wire (connect to Circuit
Breaker). See inset.
5 Green Ground Wires and Black Wire
(connect to the -48 VDC Return Bus)
6 -48 VDC Bus
7 Inset12 in. (30.5 cm) from floor to DC
Power Distribution Unit
8 DC Power Cable to Power
Connector on Each Media Gateway.
9 DC Power Distribution Unit Power
Cord (route to rear of DC Power
Cabinet)
10 Route Power Cord Through Sliding
Door
11 Circuit Breaker
12 Supplied #10-32 Screw, #10 Star
Washer, and #10-32 Hex Nut
13 Inset Showing DC Power Connector
(Male)
To Next Page
Loading...
