195
Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Connecting to the IPSIs
May 2003
4 Push the tabs on the ends of the connector inward to lock the connector in place. Refer to
‘‘Ribbon Cable Connector’’ on page 195
.
Ribbon Cable Connector
5 Thread the ribbon through the slot on the front panel.
6 Attach the other end of the short ribbon cable to the bottom connector on the component
side of the TN775D maintenance circuit pack (red line on the bottom). See ‘‘Duplex
Reliability Ribbon Cable Connection’’ on page 196.
cadsinst LJK 030102
To Next Page
Loading...
