Avaya S8700 - Page 6

6
Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Contents
May 2003
Verify media server 1 connection to customer’s
LAN (if provided) 35
Test media server 1 LEDs 37
Configure SNMP traps 38
Disconnect from media server 1 39
• Connect Duplication Cables 40
Collocated media servers 40
Separated media servers 40
• Configure Media Server 2 41
Verify software version 42
Set server configuration type 42
Upgrade media server software (if necessary) 42
Continue server 2 configuration 43
Copy settings 45
Configuring manually 45
Update System 46
Verify media server 2 connection to customer’s
LAN (if provided) 46
Test media server 2 LEDs 47
Disconnect from media server 2 47
• Connect UPS Ethernet Cables to Ethernet Switch 48
• Configure the SNMP Modules in the UPSs 49
Duplex reliability configurations 51
High/critical reliability configurations 51
Setting selected traps (alarming) 52
• Configure the SNMP Subagent in the
Avaya Ethernet Switch (if used) 53
• Customize the Active Media Server 55
Start terminal emulation 55
Input translations 56
Reset media server 56
Add media gateways 56
Administer and enable the IP Server Interface 57
Add IPSI translations to Communication Manager 58
• Install the Media Gateways 60
Check and Inspect the Order 62
Check Customer’s Order 62