Avaya S8700 - Page 7

7
Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Contents
May 2003
Unpack and Inspect the Media Gateways—MCC1 62
Unpack and Inspect the Media Gateways—SCC1 62
Unpack and Inspect the Media Gateways—G600 63
Check Circuit Packs 64
Correct Shipping Errors 66
Connect AC Power and Ground 67
Approved grounds 67
Installing an Avaya MCC1 Media Gateway 68
Position the Media Gateway 69
Install Earthquake Protection for Media Gateway 70
Connect AC Power and Ground 72
Connect Battery Leads (J58890CH-1) 77
Connect Small Battery Holdover 78
Connect Large Battery Holdover 79
Connect DC Power and Ground 81
Install Rectifier Modules and Battery Interface Unit 84
Connect Power and Ground(s) 85
Connect Grounds for DC Battery and Power Cabinets 86
Connect DC Power cabinet Approved Ground 87
Connect AC Power to DC Power cabinet 87
Connect Ground Wires for DC Power Systems 87
Turn Circuit Breakers Off 88
Connect DC Power to the Media Gateways 88
Connect DC Battery Cabinet to DC Power Cabinet 89
Connect Mixed AC/DC Power and Ground 89
Connect Remote Power Off Cable 90
Connect External Alarm Cable 92
Check Commercial Power and Connect AC Power 93
Cabling the MCC1 Media Gateways—CSS 94
Connect Fiber Optic Cables 94
Connect Duplex- or High-Reliability
CSS-Connected PN1 with 1 Switch Node 95
Connect Critical Reliability CSS-Connected PN1
with 1 Switch Node 96
Installing an Avaya SCC1 Media Gateway Stack 98
Position the Media Gateway Stacks 100
Install Earthquake Protection for Avaya SCC1 Media Gateway 101
Ground DC power media gateways 103
Connect Ground for DC power cabinet 104
Connect DC Battery Frame Ground 104