T1689 Technical Manual Rev 07 Maintenance
MV3000 Air Cooled DELTA DELTA MODULE PACKAGING & TRANSPORTATION
Page 147
8.6.1.2 Packing Materials For A DELTA Module
• a waterproof anti-static bag size 1030 mm long x 730 mm wide x 840 mm high
(≈ 41 in x 29 in x 33 in);
• 300 g (≈ 11 oz) of desiccant for moisture protection inside the bag;
• a supply of paper packing/wrapping or polystyrene suitable for the protection of a module within
the packing case during transit;
• a tri-wall packing case, with wooden pallet, of internal dimensions 965 mm wide x 710 mm deep
x 300 mm high (≈ 38 in x 28 in x 12 in) which is capable of withstanding the conditions of
transportation.
8.6.1.3 Control Components
The packaging process is detailed below:
a) Seal the module and desiccant in an anti-static bag.
b) Evacuate the air from the bag prior to final sealing.
c) Seal and label the packing box.
8.6.1.4 Packing Materials For A Control Component
• a gusseted waterproof anti-static bag size 508 mm long x 610 mm wide (≈ 20in x 24in) for the
controller;
• 10 gm of desiccant for moisture protection inside the bag;
• suitable polystyrene materials for retaining the controller in position in a packing box;
• a suitable packing box of internal dimensions 604 mm wide x 318 mm deep x 168 mm high (≈ 24
in x 13 in x 7 in) which is capable of withstanding the conditions of transportation.
To Next Page
Loading...
