Avid Technology MV3000 DELTA - About this Manual

T1689 Technical Manual Rev 07 Introduction
MV3000 Air Cooled DELTA About this Manual
Page 15
1.3 ABOUT THIS MANUAL
Section 1 – Introduction
• Overview of the main concepts used in DELTA drives;
Section 2 – Specifications
• Common environmental data for the DELTA product range;
• Gives individual DELTA component data.
Section 3 – Complete Drive Module (CDM) Design
• Guidance for component selection;
• Enclosure design;
• Cooling system design;
Section 4 – Power Drive System (PDS) Design
• Motor requirements;
• Motor and supply cable selection;
• Encoder details.
Section 5 – Complete Drive Module (CDM) Assembly
• Guidance for assembly of DELTA components into an enclosure.
Section 6 – CDM Commissioning
• Guidance for commissioning the CDM, including electrical safety checks and functional testing.
Section 7 – PDS Commissioning
• Guidance for commissioning the CDM in the final location.
Section 8 – Maintenance
• Diagnostic information;
• Preventative maintenance;
• Module replacement.
Section 9 – Disposal
Appendices
• Mechanical drawings of DELTA components;
• Electrical connection diagrams
• Torque values.