Specification T1689 Technical Manual Rev 07
Standards MV3000 Air Cooled DELTA
Page 72
2.17 STANDARDS
When installed in a CDM, in accordance with this manual, the DELTA components are designed to comply with
the standards listed below.
2.17.1 Safety
EN 50178 Electronic equipment for use in power installations.
EN 61800-5-1 Adjustable speed electrical power drive systems:
(IEC 61800-5-1) Part 5-1-Safety requirements – Electrical, thermal and energy.
ANSI / UL508C Power conversion equipment.
CAN / CSA C22.2-14 Industrial control equipment, industrial products.
2.17.2 Electromagnetic Compatibility (EMC)
EN 61800-3 Adjustable speed electrical power drive systems:
(IEC 61800-3) Part 3 – EMC product standard including specific test methods.
In particular, this includes the following immunity requirements:
IEC 61000-4-2 Electrostatic discharge 6 kV contact discharge
8 kV air discharge
IEC 61000-4-3 Electromagnetic field 80 MHz – 2 GHz, 10 V/m
2 GHz – 2.7 GHz, 1 V/m
IEC 61000-4-4 Electrical fast 2 kV
transient/burst
IEC 61000-4-5 Surge 1 kV line-line
2 kV line-earth
IEC 61000-4-6 Conducted radio-frequency 150 kHz – 80 MHz, 10 V
2.17.3 Ratings/Performance
EN 61800-2 Adjustable speed electrical power drive
(IEC 61800-2) systems:
Part 2 – General requirements - Rating specifications for low voltage
adjustable frequency power drive systems.
EN 60146-1-1 Semiconductor converters. General requirements
(IEC 60146-1-1) and line commutated converters.
To Next Page
Loading...
Need help?
General
