Avid Technology MV3000 DELTA - Appendix A: Dimensioned Mechanical Drawings; Scope; Control Arrangement

T1689 Technical Manual Rev 07 Appendix A: Dimensioned Mechanical Drawings
MV3000 Air Cooled DELTA Scope
Page 153
10. APPENDIX A: DIMENSIONED MECHANICAL DRAWINGS
10.1 SCOPE
This section gives dimensioned drawings of some DELTA components, to allow the design and fabrication of
application specific mounting arrangements.
The mechanical and electrical installation of the DELTA modules and the related control components are shown
in Section 5: CDM Assembly of this manual.
10.2 CONTROL ARRANGEMENT