show
subtargets
Checking fans on managed servers
You can check fan data on managed servers using the show command with the
/admin1/system[n]/fan[n] target.
To check fan data on an managed server:
Enter the show command followed by the /admin1/system[n]/fan[n] target.
/admin1-> show /system3/fan1
/system3/fan1
properties
CreationClassName = AVCT_Fan
SystemName = 172.26.25.122
SystemCreationClassName = 172.26.25.122:AVCT_Fan
DeviceID = 32:0:48
RequestedState = 5 (No Change)
ActiveCooling = true
EnabledState = 5 (Not Applicable)
HealthState = 0 (Unknown)
OperationalStatus =
VariableSpeed = false
ElementName = FAN 1A RPM
DesiredSpeed = 0
verbs
cd
show
subtargets
Showing console redirection to an service processor
The target for the console of the service processor on a managed server is:
/admin1/system1/textredirectsap[n]. Supported commands are show, start and stop.
To start a console redirection to an service processor:
Enter the start command followed by /admin1/system1/textredirectsap[n].
/admin1/system1-> start textredirectsap1
Booting 'Red Hat Enterprise Linux ES (2.6.9-5.ELsmp)'
root (hd0,1)
166 MergePoint® SP Manager Installer/User Guide
To Next Page
Loading...
