Avocent MERGEPOINT SP MANAGER User Manual

• To view SP firmware information
• To view SP FRU information
• To view target device power status
• To view chassis status
• To view LAN configuration
• To view SP user information (except password)
• To view the event alert destination (PET) setting
• To view the SoL configuration
• To view the current SP time
• To view SEL records
• To view sensors information
• To view SoL summary
• To execute SoL
• To view SoL history
• To execute SoL relay
• To view SEL records
• To view sensors information
• To view SoL summary
• To set SP RDP for an SP
• To set VNC for an SP
• To use the CLP commands (cd, show, version, help, oemavocent_show and exit)
SP users
The following SP user actions can be performed by all Operators:
• To view/edit LAN configuration
• To view SP user information (except password)
• To edit the SP user (including enable user, username, password and privilege)
• To view the event alert destination (PET) setting
• To set the event alert destination (PET) setting for an SP
Appendices 201

Avocent MERGEPOINT SP MANAGER Specifications

General

Brand	Avocent
Model	MERGEPOINT SP MANAGER
Category	Network Hardware
Language	English